Select BCM customization
- Turn Ignition OFF
- Disconnect and remove TCU
note: Remove main fuse and follow the service manual
- Turn Ignition ON
- Go to Diag4Bike -> BCM Customization->Telematic Control Unit -> Not Installed _> Green arrow
- Cycle ignition
- Start Engine
If engine start the proccedure is OK. -> Turn Ignition OFF
If engine not start -> Repeat the TCU Deactivation and Removal Procedure.
DO NOT SELECT INSTALLED if motorcycles is not equipped with Remote Imobilization or it will disable the motorcycle.
This feature is only available for select countries.
All configurations must adhere to country and local regulations.