A) If you want to flash one of our map Level 0-3 in ECM do it first.
If you only want to set new homologation ID in the original calibration, skip to point “B”.
In any case, you will need a multi-dongle with a tuning license paired with this motorcycle.
B) Open Advanced mode and click “Read calibration”.
C) After the DIAG4BIKE program read the calibration, carry out steps 1 to 5.
1) Click “Constants”.
2 ) Right click on the Homologation ID, the edit button will appear click on it.
3) The homologation ID settings table will be displayed, write a new homologation ID.
4) Confirm “OK”.
5) Flash the calibration to the ECM using “Store” icon.
