4.1. Basic information

 4.1. Basic information

In Toolbox are all service functions, which is possible to perform on the motorcycle. You have to agree with next items before performing the service functions:

• The use of service functions requires knowledge of the instructions from the motorcycle’s manufacturer for their usage. Usage of service functions is described in the service and/or diagnostics instructions manuals from the motorcycle’s manufacturer.

• To perform service functions successfully, it is necessary to ensure a stable and adequate power supply to the motorcycle’s electrical installation.

• Always check the condition of the battery before performing service functions. In case that the capacity of the battery is low, let it charge or replace it before proceeding.

• Prior to performing service functions, always connect a battery charger that is able to fully cover the consumption of the motorcycle’s electrical installation after switching on the ignition circuit.

• When performing individual service functions, always follow and perform all displayed instructions.

• Non-compliance to any of the above stated instructions can result in damage to the motorcycle or to a deterioration of its operational reliability.

• By expressing the following agreement, I confirm that I have thoroughly read the above stated items, and that I accept full responsibility for the compliance to the same.